Townhouse ground floor plan: 5 m wide and long, garage in front, kitchen at the back

A sample ground floor for a Taiwan townhouse (透天厝) 5 m wide and 15 m deep. The ground floor is about 75 m² (22.7 ping). The garage is at the street end, and the front door opens into the living room. A U-shaped staircase sits on one side in the middle, next to the bathroom. Dining and a one-wall kitchen take the back. A long, narrow townhouse only gets light from the front and back, so the living and dining areas have no walls between them and the light gets through. Press “Open in 3D” to try your own furniture sizes.

Open in 3D

Opens the 3D layout tool with this template. It runs in your browser, no sign-up.

Design notes

  • Garage is 5.20 m deep: a 4.7 m sedan fits, with about 50 cm between the front bumper and the wall.
  • Living room is 4.80 m wide: TV unit on one wall, sofa on the other, about 3.5 m apart.
  • The stairs sit on one side between living and dining. They start from the dining area, so going up and down never crosses between the sofa and the TV.

Room sizes

  • Garage: 4.80 × 5.20 m, 25.0 m² (7.6 ping)
  • Living room: about 4.80 × 4.10 m, 19.7 m² (6.0 ping)
  • Stairs: 2.14 × 3.48 m, 7.4 m² (2.2 ping)
  • Bathroom: 2.14 × 1.64 m, 3.5 m² (1.1 ping)
  • Dining and kitchen: about 2.54 × 5.30 m, 13.5 m² (4.1 ping)

How the area is counted

  • Ground-floor outline area about 75.0 m² (22.7 ping): measured on wall center lines, ground floor only.
  • A townhouse has no shared facilities. Its deed area covers every floor; only the ground floor is drawn here.
  • Room sizes are wall to wall. Living and dining areas have no dividing wall, so they are marked “about”.

What to know in 3D

This is a sample layout drawn by KeepOnFirst, not the plan of any real building. Ping figures are estimates. Check the builder’s plan and measure on site for real sizes.

  • The front door has an opening in 3D. The roll-up garage door on the street side is only drawn on the sample plan.
  • The stairs show only as floor tiles and a label in 3D, with no steps.

Other templates